Customer data Company Name First name Address Phone number E-mail address Process data (basic data) Description of the task* Please give us some key data on the task, installation situation and other things that are important for the design of the heat exchanger. Files/ drawings/ documents (max. 5Mb) What kind of heat exchanger is needed coolheatboth Execution No defaultCountercurrentDirect currentBundle Nominal width No defaultDN8DN10DN15DN20DN25DN32DN40DN50DN65DN80DN100DN125DN150Special size Nominal size for special size Pressure stage No defaultPN006PN010PN016PN025PN040PN063PN100PN160PN250 Terminal form No defaultSmooth flangeV-flangeLoose flange with collarMilk pipe fittingClamp nozzlePharmCom screw connectionPharamCom flangeThreaded sleeveThreaded nippleWelding endsCompression fittingCutting ring fittingERMETO screw jointSwagelok screw connectionEN 1092-1 type 01EN 1092-1 type 02EN 1092-1 type 02 / 32EN 1092-1 type 02 / 33EN 1092-1 type 04 / 34EN 1092-1 type 05EN 1092-1 type 11N 1092-1 type 12EN 1092-1 type 13EN 1092-1 type 21EN 1092-1 type 32EN 1092-1 type 33EN 1092-1 type 34DIN 11851DIN 11864-ADIN 2982Special form Please enter special designs here Overall length The heat exchanger must not exceed the following max. overall length. Without entry: No specific specifications.According to the interpretation in the offer specify. Material The heat exchanger is to be manufactured on the following material Without entry: No specific specifications.According to the interpretation in the offer specify. Does the heat exchanger have to be CIP (Clean in Place) capable? No defaultYESNO Does the heat exchanger have to be food grade according to DIN 11850(51)? No defaultYESNO Should the heat exchanger be removable for cleaning etc.? No defaultYESNO Material properties We expressly ask for the correctness of the units and conversions in the values. Tube material Input valueFerritic steelAustenitic steelCopper Input value: Thermal conductivity -λ-(W/(m*K)) Cold side Medium Input valueWaterWater with antifreeze If you have selected "Input value", please fill in the fields below: Volume flow (m³/h) Density (kg/m³) Dynamic viscosity (mPas) Thermal conductivity (W/m*K) Spec. heat capacity (J/(kg*K) Input temperature of the medium (°C) Temperature to be reached (°C) Permissible tolerance (°C) Warm side Medium Input valueWaterWater with antifreeze If you have selected "Input value", please fill in the fields below: Volume flow (m³/h) Density (kg/m³) Dynamic viscosity (mPas) Thermal conductivity (W/m*K) Spec. heat capacity (J/(kg*K) Input temperature of the medium (°C) Temperature to be reached (°C) Permissible tolerance (°C) Δ